Skip to content
Brake Theory

Learning Center

Every topic, one place

Browse all seven braking topics, then test what you learned.
New brake pads beside a drilled brake rotor on a gray surface

Brake Pads and Rotors

Friction between pads and a spinning rotor turns motion into heat, which slows the wheel.

  • Pads are made of friction material bonded to a steel backing plate. Rotors are iron discs that spin with the wheel.
  • Both wear gradually. Many pads include a small metal tab that squeals when the friction material gets thin.
  • Rotors can develop grooves or uneven thickness over time, which may cause vibration while braking.
Red brake caliper mounted over a slotted rotor behind an alloy wheel

Brake Calipers

The caliper squeezes the pads against the rotor when hydraulic pressure arrives.

  • Floating calipers use pistons on one side and slide to clamp both pads. Fixed calipers have pistons on both sides.
  • Seized slide pins or pistons can make a vehicle pull to one side or cause uneven pad wear.
Brake fluid reservoir with amber fluid in an engine bay

Brake Fluid

Brake fluid carries the force from your foot to every wheel through sealed lines.

  • Fluid does not compress, so pedal force is transmitted almost instantly to the calipers.
  • Most brake fluids absorb moisture over time, which lowers their boiling point. Vehicle manuals list a recommended change interval.
  • A low reservoir level can point to worn pads or a leak and is worth having checked.
Close view of a brake rotor and caliper representing ABS controlled wheels

Anti-lock Braking Systems (ABS)

ABS rapidly modulates pressure to keep wheels from locking so you can still steer.

  • Wheel speed sensors watch each wheel. When one slows too quickly, a valve briefly releases and reapplies pressure.
  • In a hard stop you may feel pulsing in the pedal. That is normal. Keep firm, steady pressure and steer.
Car with headlights on approaching along a road

Stopping Distance

Total stopping distance is reaction distance plus braking distance.

  • Reaction distance is how far you travel before your foot reaches the pedal.
  • Braking distance grows roughly with the square of speed, so doubling speed can roughly quadruple braking distance.
  • Tire condition, road surface, load, and brake condition all affect the result.
Brake hydraulic components related to dashboard warning indicators

Brake Warning Indicators

Dashboard lights report parking brake status, low fluid, and ABS faults.

  • A red brake light can mean the parking brake is on or fluid is low. An amber ABS light means the anti-lock system has a fault.
  • Check your owner's manual for the meaning of each light on your specific vehicle.
Wet road reflecting car headlights in the rain at dusk

Wet-Weather Braking

Water reduces tire grip, so stopping takes longer on wet roads.

  • Increase following distance and brake earlier and more gently.
  • Deep standing water can cause hydroplaning. Ease off the accelerator rather than braking hard.
  • After driving through deep water, light brake applications can help dry the pads and rotors.

Quick Knowledge Quiz

  1. 1. What does pedal pulsing during a hard stop usually mean?
  2. 2. If you double your speed, braking distance roughly...
  3. 3. Why does brake fluid need periodic replacement?

How ABS Works

A wheel speed sensor reports how fast each wheel turns.

Get Brake Safety Tips